About this tool
This calculator turns a child's peak expiratory flow reading into a percentage of the expected value and an asthma zone. It is for clinicians in clinics, urgent care and the emergency department, and for writing the zones into a child's asthma action plan.
Choose whether to compare with the value predicted from height or with the child's personal best (the better reference once known). Enter the height in centimeters or inches (the predicted table covers 109–170 cm) or the personal best, then the measured peak flow in liters per minute (best of 3 blows, standing). Readings are reliable from about 5–6 years with good technique.
The result shows the predicted value or personal best, the % of it, the zone (green 80% or more, yellow 50–79%, red under 50%) with what to do next, the cut-offs in L/min for this child's action plan, and the EPR-3 acute severity band (mild 70% or more, moderate 40–69%, severe under 40%, life-threatening under 25%). Predicted values are from Polgar and Promadhat 1971 (height only, both sexes); zones and severity follow NHLBI EPR-3, with GINA 2025.
Common questions
What is a normal peak flow for a child?
It depends mainly on height. On the Polgar table a child 120 cm tall is expected to blow about 204 L/min and a child 150 cm tall about 361 L/min. A child's own personal best, measured when well, is a better reference than any table.
What are the peak flow zones?
Green is 80% or more of personal best (or predicted), yellow 50–79% and red under 50%. Green means continue the usual plan; yellow means use the reliever and follow the action plan; red means use the reliever and get medical help now.
From what age can children use a peak flow meter?
Most children can give reproducible readings from about 5–6 years. Younger or very breathless children cannot blow reliably; use a clinical score such as PRAM instead.
Does the peak flow meter brand matter?
Yes. Readings differ between meters, so use the same meter each time and set the personal best on it. Older predicted tables such as Polgar were made with Wright-scale meters; meters made to the newer EU scale can read lower in the middle range.